PHR INTRODUCES THE WORLDS FIRST AND ONLY TRIPLE WALBRO 485 FUEL PUMP HANGER FOR LEXUS IS300 and LEXUS GS300!
Part # 03091202
With a Flow Rating of over 800 lph or 267 Gallons per hour at 90psi, this pump setup is good for over 1900hp on Race Gas, 1400hp on E85!!!
Powerhouse Racing is proud to offer a legitimate solution for a hanger for the IS300, and GS300 Platforms. Use it to install 1, 2 or 3 fuel pumps. For too long IS300 and GS300 owners have had to come up with compromises in fuel systems. PHR is the first to tackle this problem with the Triple Walbro 485 fuel pump hanger.
With integrated billet high flow jet pump (siphon valve), this is the complete solution for fitting these pumps in the IS300 or GS300 fuel tanks. No hacking stock parts to try to keep from running out of fuel at 1/4 tank.
This triple pump hanger features:
CNC machined 6061 aluminum construction
Exact fit to the OEM tank
All applicable hardware
Proprietary sealed circular connectors potted with E85-safe epoxy
All PHR Hangers use Mil-Spec M22759/16 Tefzel wire.
Pumps can be triggered individually in staged sequence (and should be).
Anodized black! This will ensure our hangers can be used permanently in alcohol / methanol / E85 fuels with no concerns of long term corrosion.
Teflon Hoses, fully compatible with any fuel type.
The hanger will come standard with a single -8AN outlet, and a -6AN return fitting. There are two outlet ports for those who are wanting to run dual feed lines, one of which will come with a plug in it. You can add additional fittings below for running different line configurations and sizes.
PHR Triple Walbro Fuel Pump Hanger for Lexus IS300 Installation Instructions